DRY-AIR STAINLESS STEEL SPECIFICATION SHEET
DAP-HC-030 NOMINAL 2.5 TON UNIT
The DRY-AIR Stainless Steel HGR Series 030 is built with a 4 Row Field Cleanable Evaporator Coil. This system simultaneously rejects heat to the pool, room and outdoor condenser. Vertical, Horizontal and Downflow units are standard. Economizer fresh-air purge option available. The available options are air cooled, water cooled and as a ground source Geothermal Heat Pump Application. All 1-12 tons come single or three phase.
Specifications are subject to change without notice.
Refrigerant:
R-22, R410A is available
Cooling BTU’s:
30,300 (NOMINAL)
Compressors:
Hermetically Sealed Scroll
Unit Capacity @ 50% RH:
12.12 lbs./hr. moisture removal
Unit Capacity @ 60% RH:
15.25 lbs./hr. moisture removal
Nominal CFM:
1000+
Dimensions
Height:
49.0”
Width:
26.0”
Depth:
31.0”
Water Loop In:
3/4"
Water Loop Out:
3/4"
Weight:
230 lbs.
Filter Size:
22”x30”
FLS Condenser
#104
Electrical Requirements 208-230-1-60 Single Phase
Compressor RLA:
12.3
Compressor LRA:
73.0
Fan Motor FLA:
1.7
Fan Motor LRA:
4.5
Total Unit:
14.0
MCA:
20.0
Max. Fuse:
25.0
Controls are 24 Volts off unit.
Supply:
Top, Right or Left
Return:
Left or Right
Plumbing is located front left, electrical panel front right, and compressors on bottom right hand side of unit.
36” Clearance from front and right hand bottom side required for access and serviceability.
EPS is the home of DRY-AIR & VERI-DRY. We provide Design, Engineering, Consulting and Manufacturing for Residential and Commercial Indoor Swimming Pool Applications.
