Temperature Settings

Pool Temperature 80 to 84 degrees F (recommended)

Room Temperature 82 to 86 F (recommended)

Humidity 60% during warmer months, 50% in colder months.

IMPORTANT: WITHOUT A POOL COVER, The thermostat should be programmed to maintain a temperature of 82 degrees in the winter and 84 in the summer-[in all programmable time settings] The mode of selection should always remain in the AUTO mode.

WITH A POOL COVER, the room temperature can be set to any desired setting but before removing the cover, the room temperature should be at or above the pool temperature.

NOTE: The humidity setting should NEVER be set below 50%. The unit is sized to maintain a 50 to 60 percent relative humidity envelope. Setting the humidistat below 50% to a lower the humidity is not achievable since the evaporation rate accelerates as the humidity drops. As a result the units runs continuous using excessive energy with no benefits.

Once a comfortable setting has been achieved, the room will take to balance and the controls should not be altered. NEVER TURN THE ROOM TEMPERATURE BELOW THE WATER TEMPERATURE UNLESS A POOL COVER IS IN PLACE.

In warm weather, opening the doors/windows and airig out the pool enclosure is always beneficial as well as economical. When doing so, be sure to turn both the thermostat and humidistat to the OFF position first.