Getting “BACK
to BASICS” in the design and engineering
of the DRY-AIR Heat Recovery Packaged Dehumidifiers was a result of
input from architects, engineers and mechanical contracting
firms. DRY-AIR has become the preferred choice of architects, engineers, mechanical firms, and owners all over the country, because we have solved these problems:
LET'S
TALK FOOTPRINT!
CENTERPOINTE MARRIOTT HOTEL
DRY-AIR
DAP150-12 TON Height:59",
Width:32", Depth:40" Mechanical Space:
11x6 feet
Problems with Waste Ventilation Systems
Oversized equipment that had to be brought in by crane
Equipment that
utilized a great deal of space
Difficulty installing
and servicing complicated equipment
and controls
8 Row Evaporator Coils—that once dirty,
cannot be cleaned
Equipment that simply wasn’t
holding up or performing to expectations and specifications.
At EPS, we pride ourselves on a solution driven and diverse
product line that is custom built to specifications for
each project. You have several options available to you:
Each option provides the smallest footprint, the lowest
refrigerant charge per ton, and cleanable 4 Row Evaporator
Coils.
The DRY-AIR Dehumidifiers are a single packaged component
containing the compressor, air handler, air coils, and
water to refrigerant coils. The unit is generally coupled
to an inline duct heater, electric heating module, steam
or hot water coil for room heating and a secondary stainless
steel pool water heat exchanger. The units feature a built-in
full capacity water-to refrigerant condensing coil for
pool heat. Our design makes installation much easier than
conventional systems. Our smaller footprint and built-in
standard oversized water cooled condensers make it extremely
simple and easy to install. All DRY-AIR dehumidifiers will
fit through a 36” door frame. Maintenance is drastically
reduced since all refrigeration components are confined
to interior mechanical areas.
STAINLESS
STEEL PRODUCT LINE
-DRY-AIR HGR Triple Function Stainless Steel Packaged Dehumidifiers
in 1-12 Tons for residential and small commercial projects,
ETL Listed, CAN/CSA Certified, Meet BP Green Criteria Code,
and carries the Energy Star Label. Coils are epoxy coated.
GALVA-LUME AND G-90 PRODUCT LINE
EM & MB-MC
ARE NEW YORK CITY VENDOR APPROVED.
-DRY-AIR
HGR-EM Triple Function Systems Packaged Dehumidifiers
in 1-30 Tons for medium to large commercial projects
(1-6 Tons in Galva-Lume, 8-25 Tons in G-90 Galvanized – both
highly resistant to chlorine environments), UL Listed,
CAN/CSA Certified. Coils are epoxy coated.
-DRY-AIR
HGR-MB Triple Function Systems from 30-60 Ton
Modular unit in G-90 Galvanized for large commercial
projects, schools, community centers, water parks, etc.
UL Listed, CAN/CSA Certified, Quad compressors-quad circuited,
and the smallest footprint in the industry. The 60 ton
unit comes in 6 easily assembled bolt together sections,
NO refrigeration piping is necessary and can fit through
a 36” door. Less Complicated, Easily Installed,
Service Friendly - DRY-AIR Dehumidifiers are a "BACK
TO BASICS" system. We've gone back to easily read
and serviced controls. They are simple, less complicated
to install (reducing installation costs and time) and
easily serviced by any mechanical contractor. When the
mechanical firm completes the installation, the owner
can easily understand and operate his/her system. They
are extremely reliable and built for the long haul! EM
Series & MB Series is NYC Vendor Approved.
And,
with the cost of square footage today for commercial and
residential buildings, less and less mechanical space is
being allocated. EPS has solved this problem by designing
units small enough to be located within a building’s
mechanical space, and MINIMUM space is required. This alleviates
the high cost of maintenance and downtime for rooftop equipment.
FEATURES
OF DRY-AIR DEHUMIDIFIERS
NEW
HGR TRIPLE FUNCTION DRY-AIR DEHUMIDIFIERS – The new
HGR Series will reclaim 100% of all potentially wasted
BTU’S. In the dehumidification mode, all DRY-AIR
triple function units reclaim the latent heat, adds the
compressor heat, rejecting it back to the room and pool
simultaneously. As the pool begins to reach its set point,
it begins to reject some of the excess heat to outside
condenser. The only reclaim swimming pool dehumidification
system capable of rejecting heat to three external source
simultaneously.
CLEANABLE EVAPORATOR COILS
This feature continues to be one of the most talked about throughout the industry. Most reclaim dehumidifiers use 6 and 8 row evaporator coils. Manufacturers and HVAC professionals are keenly aware of the difficulties related to cleaning and servicing these coils. Most licensed contractors state, a dirty 8 Row Wet Evaporator Coil is impossible to clean. The next step would be to replace the coils, a very expensive process that would need to be done several times over the lifespan of the equipment.
All Dry-Air Dehumidifiers are liquid source based machines. They come standard with built in oversized water cooled condensers. EPS offers a complete line of DRY-AIR GEOTHERMAL products, which incorporates geothermal technology and efficiencies.
DUAL COMPRESSOR– DUAL CIRCUITED
This outstanding feature is standard on larger DRY-AIR Dehumidifiers starting at 6 tons. Short cycling is reduced while efficiencies are increased due to staging capabilities. This design also provides redundancy. If there is a compressor failure, the system will continue to operate at 50% capacity.
100%
Pool Water Heating or Pool Water Heating on Reclaim Basis – With
100% Pool Heating Option – no pool heater or boiler
is necessary. This feature works well with DRY-AIR Geothermal
Systems. Pool Heat Reclaim provides for all excess heat
to be transferred to the pool to help keep it up to temperature.
A pool heater is required with the reclaim option.
SECONDARY
ISOLATION HEAT EXCHANGERS
This is an outstanding feature that is standard on
all DRY-AIR Dehumidifiers. This feature isolates the
aggressive pool and spa water from the water-to-freon
exchangers in the refrigeration circuit. This very
significant feature eliminates costly failures of standard
copper exchangers causing water to flood the compressor
and refrigeration circuit. This condition renders the
equipment unsalvageable. The DRY-AIR secondary isolation
plate heat exchanger guarantees 100% dual protection
against pool water or system contamination.
SECONDARY
COOLANT REFRIGERATION
TECHNOLOGY- A/C
E.P.S.,
Inc. introduced integrated, secondary coolant refrigeration
systems in 1989. Simply stated, secondary coolant
systems will provide:
-Reduced refrigeration system complexity
-Lower system installed costs
-Lower annual maintenance costs
-Annual Energy Savings
-Significant reduction in refrigerant charge
-Improved product quality
-Automatic Code Compliance
-Environmentally Sound – “Green” Acceptance
OUTDOOR
FLUID COOLERS (CONDENSING UNITS) – Our
design using secondary coolant refrigeration technology
is an outstanding feature on all DRY-AIR Dehumidification
systems. This design eliminates the need or the installing
contractor to invade the refrigeration circuit when using
our outdoor condensing package. It also does not limit
the distance between the DRY-AIR Dehumidifier and the
outdoor condensing package. In commercial buildings that
utilize a boiler/cooling tower application, we can tie
into the loop and an outdoor condenser is not necessary.
EPS is the home of DRY-AIR & VERI-DRY. We provide Design, Engineering, Consulting and Manufacturing for Residential and Commercial Indoor Swimming Pool Applications.
