Pool
Temperature 80 to 84
degrees F (recommended) |
|
Room
Temperature 82 to 86
F (recommended) |
|
Humidity 60%
during warmer months, 50% in colder
months. |
|
IMPORTANT: WITHOUT
A POOL COVER, The thermostat
should be programmed to maintain
a temperature of 82 degrees in the
winter and 84 in the summer-[in all
programmable time settings] The mode
of selection should always remain
in the AUTO mode.
|
WITH
A POOL COVER, the
room temperature can be set to any
desired setting but before
removing the cover, the
room temperature should be at or
above the pool temperature.
|
NOTE: The
humidity setting should NEVER be
set below 50%. The
unit is sized to maintain a 50 to
60 percent relative humidity envelope.
Setting the humidistat below 50%
to a lower the humidity is not achievable
since the evaporation rate accelerates
as the humidity drops. As a result
the units runs continuos using excessive
energy with no benefits |
|
Once
a comfortable setting has been achieved,
the room will take to balance and the
controls should not be altered. NEVER
TURN THE ROOM TEMPERATURE BELOW THE WATER
TEMPERATURE UNLESS A POOL COVER IS IN
PLACE.
|
In
warm weather, opening the doors/windows
and airig out the pool enclosure is always
beneficial as well as economical. When
doing so, be sure to turn both
the thermostat and humidistat to the
OFF position first.
|
